Notice Arai Tour-X5 Helmet: The best Trail helmet in 2026?

Landed on the market in 2024, the Arai Tour - X5 Headset It quickly established itself as the worthy successor to the iconic Tour-X4. Starting from a blank sheet of paper, this helmet has redefined the standards of High-end trail helmet. For the start of the 2025 season, the Japanese manufacturer is highlighting this bestseller with the new ‘Match’ colour range.

The perfect opportunity for us to give you our the Arai Tour - X5 and to dissect what makes it a reference for adventure. Is this the helmet you need? Our complete analysis.

Arai Tour-X5: Legacy of a reference trail helmet

The concept that made the range so successful is still there: 3-in-1 modularity, an essential feature for a Adventure Helmet versatile.

• Trail mode: With visor and screen, for long-term adventure.

• Off-Road mode: With visor but without screen, to slide a cross mask.

• Road mode: Without visor, like a classic integral.

But the revolution of this New Arai Helmet hides in the details. Arai wanted the Tour-X5 to be more versatile and, above all, more accessible by focusing on three pillars: safety, comfort and practicality.

Safety of Tour-X5: Arai’s top priority

At Arai, the safety of bikers is not an empty word, it has been part of the brand’s DNA since its inception. The Tour-X5 takes the house philosophy even further.

• Form “Ricochet” R75: The hull is even rounder and smoother. The idea is simple: in the event of a fall, the helmet must slide over the obstacles, not cling to them. This R75 shape optimises the ‘Glancing Off’ effect to dissipate the energy from the impact.

• PB-cLc2 shell: A barbaric name for cutting-edge technology. A new fibre weaving and a special resin (‘Melange-Z’) make it possible to create a shell that is both thinner, lighter and, above all, extremely resistant.

• VAS screen and plates: The screen attachment system is lower and recessed. This frees up a crucial area on the temples, making the hull even smoother and therefore safer, in accordance with the R75 principle.

Comfort and maintenance: our opinion on the interior of the Tour-X5

A good adventure helmet must be a cocoon, even after 10 hours of saddle. Arai understood this well.

• Wiring Ease of use: This was a weak point of the X4 for some. The Tour-X5 corrects the shot with a 5mm wide base on each side. Result: the helmet slips on and off much more easily, without sacrificing holding.

• Interior FSC: The face contour system (FCS), inherited from the F1, uses a rigid slat in cheek foams for perfect support on the jaw. This improves comfort but also soundproofing.

• Quality fabrics: The interior is fully removable, washable, hypoallergenic and anti-bacterial treated. The foams are designed to easily integrate the loudspeakers of an intercom.

Practicality and vision in the field

• Wider field of vision: Thanks to the new VAS turntables, the VAS-A Max Vision display offers a panoramic field of view. A Pinlock 120 is also supplied as standard, a real plus.

• Optimized ventilation: The famous 3D Arai logo now serves as a front air inlet, complemented by a large chin air intake adjustable in 3 positions and no less than six extractors at the rear.

• Disassembly of the screen without tools: No more trouble. Replacing the screen or switching to off-road mode is quick and easy.

Balance sheet:  Quality, comfort, safety, hard to do better!

Meeting (and going far beyond) the latest safety standards (ECE 22-06-), the Arai Tour-X5 is not just a good helmet. it strives for excellence in three key areas.

The quality is the first evidence: every detail, from deep paint to the millimeter-sized adjustment of the vents, demonstrates Japanese craftsmanship that borders on perfection.

This attention to detail translates into a comfort imperial once the helmet is put on; the balance is perfect, the maintenance of the FCS system is reassuring without ever being oppressive, and the management of noise and airflow is controlled.

Finally, the security It is not a marketing argument but the true DNA of this helmet. The R75 shape designed to slide, the Ultra-resistant hull and the absence of any superfluous gadgets that could compromise its integrity make it a real safe.  In the end, if perfection does not exist, Arai proves with the Tour-X5 that it is possible to get very close to it.

Comparison: The Arai Tour-X5 against its Competitors

Where is the Arai Tour - X5 Headset against others Best Trail Helmets ?

• Arai Tour-X5 vs Shoei Hornet ADV: It is its most direct competitor. The choice between these two Japanese helmets is often made on the shape of the skull and personal preferences. But watch out for him. Shoei Hornet ADV  is not ECE 22-06 approved, but meets the old standard ECE 22.05

• Arai Tour-X5 vs Schuberth E2 : The German alternative. E2 is a more "technological" modular (sunscreen, pre-integrated intercom), a different philosophy.

• Arai Tour-X5 vs Klim Krios Pro : The Klim is the featherweight champion thanks to its carbon shell, but it is often perceived as noisier and less ‘cossu’ than the Arai.

Verdict and Final Opinion Freenduro: Is the Arai Tour-X5 worth the price?

The Arai Tour - X5 It quickly established itself as much more than a mere evolution of its predecessor. It retains the Arai DNA – a hand-made in Japan and an unparalleled level of safety – while erasing the few flaws of the Tour-X4. The increased comfort, ease of threading and practical improvements make it the logical choice for the demanding adventurous biker.

For whom? For the one who seeks the Best Trail Helmet without compromise on safety and comfort. Whether it is to cross a continent or for the Sunday ride, the Tour-X5 responds present.

His only brake remains his price elitist. To 999,95 € For this new ‘Match’ version, excellence is paid for. But it is the cost of peace of mind and comfort that will make you forget that you are wearing a helmet. Our the Arai Tour - X5 is therefore clear: if the budget is not an obstacle, this is probably one of the best investments you can make for your motorcycle safety.

Technical data sheet in brief

• Shell: PB-e-cLc2 fibers, R75 oval shape, 3 shell sizes.

• Approval: ECE 22.06.

• Modularity: Trail, Integral, Off-Road.

• Interior: Removable, washable, Dry-cool® fabric, FCS system.

• Breakdown: 3 inputs (including 3D logo), 6 extractors.

• Screen: VAS-A Max Vision with Pinlock 120 included. Disassembly without tools.

• Jugular: Double-D loop.

• Security +: Emergency extraction system (ERS), ricochet effect.

• Weight: 1700g (+/- 50g) in size M.

• Guarantee: Five years.

• Manufacture: Handmade, Japan.

Practical information

• Model: Arai Tour-X5 (New ‘Match’ colours)

• Sizes: XS to XL

• ‘Match’ colours: Four new variations to match your machine and outfit.

• Advised Public Prize: 999,95 €